Відео

DM&IR Yellowstone V.S. C&O Allegheny WHO WINS!?

Scaletrains said already that they don’t plan to bring SD70ace tight now

As I saw you use an ESU Ecos. Does it have trouble to Programm BLI decoders? Like changing CVs and DCC addresses?

There had been an interview with ScaleTrains recently. After the J-Class they will bring the Berkshire then the Daylight then the Challenger and then the Yellowstone 😅

Hey quick question, I just got one of these, I thought I heard it on your video as well, is some gear noise at higher speeds normal? It’s like a little quiet grind a little and I think I heard it here too. Lubed up the main gears under the wheel sets as well so it shouldn’t be dry

2024 and I just bought the same but it's CSX #7658 and it all came up to you $70. Can't wait to get it in the mail.

Как я не присматривался к S1, T1 все равно симпатичнее..

oh Jeez, the usual BLI lousy smoke unit 🤬

That sounds fantastic.

I might loosely base my HO layout on this area, Ive been collecting a lot data on the area. Hey we might be local to each other, I also collect transformers and trains. If you ever want to discuss things im open to it.

You need rolling thunder module and subwoofer it will blow away MTH and not have that annoying sound of MTH smoke pump

Today it’s still in service

Don't think it is accurate.

The video description is model railroading in a nutshell 😂😂😂

I know this is an old video but did you notice the missing fan cover on top of the locomotive?

i seriously just watched 16 minutes of someone taking a video of a screen and pointing at it lol

BLI is wild for doing this locomotive! Gives me hope that other steamers that haven't been done in either plastic or, as brass hybrids, like Frisco 1522, might actually get produced, not to mention BLI has dropped some hints that that locomotive is possibly in the works as a future release!

The HO S1 will be really nice. I just sold a Tuscan S1 last week.

No interest in the B6sb from Broadway Limited?

Planning on getting a ScaleTrains J? Also if you’re interested take a look at the Cardinal River Models NKP Berkshire coming out, those things look super cool.

Just bought one of those, but an older one with a QSI decoder. It runs great but the sounds...the engine sounds like it wont go past notch 4 or something. When accelerating, or "heavy load" option on, it always stays at lower RPM. Maybe I'm missing something as it's my first sound loco

Could someone tell me where the smoke switch is on this loco? the manual shows a boiler cap can be removed but it doesnt appear so.

A very good how to video. Your Dash 8 sounds better after your mods. Loco sounds bettter as well. Thanks for posting this video.

I have several Dash 8 Cs and CWs, While I can eventually remove the body shell, how do yo put it back on without damaging anything? Could you do a quick video on this please? Mine are Silver series analogue versions.

Very cool Paragon

So excited to find this - it actually work! Then, shut it all off, come back 15 minutes later, right back to address 0003. Arg!!

I have latest run Pere Marquette Berkshire with smoking whistle. Attempted to perform factory rest using 55 procedure with my ESU cab Control. Before the rest I had sound and lights but no chuff or smoke and jerky motion forward and reverse. Followed the reset procedure and now have nothing, decoder acts like it is dead!!

This coming from my experience with MTH locos. when I got a brand new one, I typically had to run it a few laps before it would perform smoothly.

The squeaking issue you have is probably the pickups in the side frames.Pulling the trucks apart & putting the minutist amount of oil on the wheel axels should do it, though this video being 3 years old, by now you would have the issue sorted . Think you mentioned buying new trucks to fix the problem, hopefully?I mean, by smallest amount of oil, by, a drop, then, wiping it off with a tissue.

Whats the Kato part number for your two largest outer tracks? I just got this Daylight loco a d it binds in the curves an pops a driver off sometimes. Have you had any issues like that with yours? Thanks for all your great videos Matt!

Great loco!🚂. I have one.

Check out the newest update for the CabControl 50310 unit with real scale speed indication!

It would be nice if the class lights were operational to wear you can adjust the brightness of them and switch between colors like scaletrains engines are.

Very impressive and attractive model of the SP GS4 type locomotive, if I decide to purchase any of these models in the future I will most likely purchase a model in the postwar black/ silver paint scheme as that is my personal preference.

Im waiting for the dcc ready version myself, sound is definitely more accurate than previous versions but not close enough for me. The chuffing doesnt sound right, i want more whistle selections, i also want to add a few custom sounds as well.

the Broadway limited k5a Hudson is the most rare, but still great video!

Matt, have you still got the MTH ho big Boy the you reviewed around 2022? you didn't like the sound. anyway, have you still got it? Cheers!

Matt, have you still got the MTH ho big Boy the you reviewed around 2022? you didn't like the sound. anyway, have you still got it? Cheers!

I am an avid Pennsy modeler in HO. My favorite livery is the FOM. Not crazy about Bachmann products, but you are correct - not allot of good choices out there unless you go brass. I am modeling a 1947 edition of PRR’s “Spirit of St. Louis” train. Its difficult trying to be historically accurate. I have both Walthers and Branchlines FOM sleepers. Probably going to purchase the observation (which Bachmann has accurately labeled a “Narrows” observation for the Spirit). Also purchase the diner. Thank you for doing a vid on these.

I think the reason for the plastic couplers is because they own the co. that makes them.

I can't decide if I want to get the stealth version or take my chances with the paragon 4. Smoke isn't a big deal for me. This would be my first BLI loco and have read there have been many issues in the past with the paragon decoders. Any thoughts on the reliably of the p4 compared to the p3?

its $150 i have two and never had a problem with it. im not sure what you problem .

Well I had told my friend that is a conductor’s club member if it was a challenger I didn’t need to know and now I’m selling excess collection items to fund a sound equipped 3985 lol. Considering how accurate the GS-4 file was I’m excited for what the sounds for 3985 will be like.

You looking at 2 different models from 2 different makers and 2 different eras of 3985. She has changed over the years and when tge next version comes out and when she hits the rails again she will look different.

Is there any way to quiet down the noisy drivetrains? My scaletrains and Kato are dead silent..

Does anybody know how prototypically accurate the pre-2013 (W/ Mars Light) #844 model is? Specifically the marker lights on the tender. I currently own the Athearn version and I'm thinking about picking up one of these but I'd rather not if it's less accurate.

Esu is coming out with a direct drop in adaptor board for p3&4 models

Are these the only locomotives to be offered? It mentions you need to pre-order by May 30th, so if you join after there's no chance at locos? Or will they just stop offering after May 30th Also is there an inexpensive DCC decoder that'd work with this? I keep reading Paragon DCC is "junk"

Wow! This is a fantastic deal. Thanks for making this video.

The thing I don't like the walthers mainline Budd cars is.. They are not really prototypical based on certain roads. Don't get me wrong. They are nice. But in the SP version of these . They are not accurate. Also. That dome is not correct. That's just a santa fe dome slapped with sp colors. I did pre order the rapido sp 3 quarter dome